65 Connecting the VPS to a PC or LAN. 69 Connecting the KX-TVM755 to the KX-TDA655. For the KX-TVM55, twisted pair 7-conductor cables are needed if using Inband or None Integration.
7 Names and Locations KX-TVM755 Run Indicator Alarm Indicator Dummy Cover Plates (for Port Card Slots 6 to 6) Reset Button Shutdown Button Mode Switch LAN Port USB Port VM-Link Dummy Cover Plate (for Modem Card) Earth Terminal DC IN Power Switch Main Board 8. Removing the Dummy Cover Plates.
You must activate the corresponding data query plugin, click the Setup button and specify the password: Note:
this feature is available in the Trial, Professional and Enterprise versions only. CD-ROM Necessary Tools (not supplied) Twisted pair 9-conductor cables are needed for connecting the VPS to the PBX.
KX-TVM55 KX-TVM755 Model Thank you for purchasing a Panasonic Voice Processing System. It means that our software will initiate connection with the PBX and the PBX will work as a server.
Products and companies mentioned here are used only for definition and identification purposes and can be trademarks and/or registered trademarks of the respective companies. 9 Installing Optional Cards in the KX-TVM55.
Kx p1123 Driver Windows 7For detailed information, refer to the Installation Manual. 7 Names and Locations Names and Locations KX-TVM55 Run Indicator Alarm Indicator Dummy Cover Plates (for Port Card Slots 7 and 8) Factory-installed Jacks Reset Button Shutdown Button Mode Switch USB Port Dummy Cover Plate (for LAN Interface Card) Dummy Cover Plate (Reserved)6.
Conquest frontier WarsIf you are willing to use the USB driver for call accounting you must be aware that the original Panasonic USB Driver does not supports this. 67 Connecting the KX-TVM55 to the KX-TDA85.
Our software should work in the TCP client mode. There are thridparty commercial drivers that could do that.
This manual shows you how to install and programme this product so that you can operate the basic features. 65 Installing Port Cards in the KX-TVM755.
A USB cable is needed when connecting the VPS to the PC that will used for programming via the KX-TVM Maintenance Console.